About
A dry battery recycling box for corridors based on the Internet of Things
https://github.com/YZP-PCQUICK/quest-tenman.git
点击空白处退出提示
tenman产品系统
我要开发同款技术信息
作品详情
行业场景
功能介绍
tenman
Project Description
A corridor dry battery recycling box based on the Internet of Things, welcome technical exchanges, official website:www.pcquick.cn
PCB production
go to https://www.jlc.com/ upload PCB/tenman_4.eprj document，PCB board manufacturing is carried out according to the PCB/tenman_4.eprj file, and SG90 servo motor, ESP32 development board, and st7789 display screen are soldered onto the PCB board.
software installation
1.Burn ESP32 firmware
Connect the computer and development board using a data cable, and burn the Firmware/esp32-20220618-v1.19.1.bin onto the development board. Please check if the USB serial port permission on the computer is enabled.
2.Upload program
Upload the program from the ESP32 folder to the development board via USB serial port and run it. As
项目实现
tenman
Project Description
A corridor dry battery recycling box based on the Internet of Things, welcome technical exchanges, official website:www.pcquick.cn
PCB production
go to https://www.jlc.com/ upload PCB/tenman_4.eprj document，PCB board manufacturing is carried out according to the PCB/tenman_4.eprj file, and SG90 servo motor, ESP32 development board, and st7789 display screen are soldered onto the PCB board.
software installation
1.Burn ESP32 firmware
Connect the computer and development board using a data cable, and burn the Firmware/esp32-20220618-v1.19.1.bin onto the development board. Please check if the USB serial port permission on the computer is enabled.
2.Upload program
Upload the program from the ESP32 folder to the development board via USB serial port and run it. As
示例图片
声明：本文仅代表作者观点，不代表本站立场。如果侵犯到您的合法权益，请联系我们删除侵权资源！如果遇到资源链接失效，请您通过评论或工单的方式通知管理员。未经允许，不得转载，本站所有资源文章禁止商业使用运营!
评论